The JK-21 is a laboratory beater widely used for pilot beating of pulps, papers and boards.
The HV-10 is a laboratory beater used for pilot beating of pulps in the Q.C.
The fiber classificator is used for the seperation of pulps into fines, shives and useful fibers
The Disintegrator model DSG-2000 is an equipement indispensable for thel aboratory wet desintegra
The COBB method is used worldwide to determine the water absorptivness of sized paper and board,
The Canadian Freeness Tester is used to determine the drainability of pulp suspensions. Drainabi
The FD-21 is a semi-automatic laboratory SQUARE sheet former used for the production of standard
The FC-21 is a manual laboratory sheet former used for the production of standard circular labora
The ETB268-F2 is a 20°, 60°, 85° Angle Gloss Meter, designed and manufactured according to multip
The WL5700 Foam Mixer has been designed for the rapid mixing of foam compounds to produce a well-
- Range: 0 – 10,000 x 1gf
- Image Detector: 1/2 inch, CCD 200 lens
Providing frequency conversion type Mooney Viscometer to test the viscosity of particular rubber
- Drop angle of pendulum: 90°
- Impact Action: 0.5J / 0.2J
The CT-2000 determines the compression strength of corrugated fibreboard and its components for Q